# 8.3.4 完整性约束

* [not null与default](http://www.cnblogs.com/linhaifeng/articles/7238814.html#_label2)
* [unique](http://www.cnblogs.com/linhaifeng/articles/7238814.html#_label3)
* [primary key](http://www.cnblogs.com/linhaifeng/articles/7238814.html#_label4)
* [auto\_increment](http://www.cnblogs.com/linhaifeng/articles/7238814.html#_label5)
* [foreign key](http://www.cnblogs.com/linhaifeng/articles/7238814.html#_label6)

> **本节时长需控制在15分钟内**

## 一、介绍

约束条件与数据类型的宽度一样，都是可选参数

作用：用于保证数据的完整性和一致性\
主要分为：

```
PRIMARY KEY (PK)    标识该字段为该表的主键，可以唯一的标识记录
FOREIGN KEY (FK)    标识该字段为该表的外键
NOT NULL    标识该字段不能为空
UNIQUE KEY (UK)    标识该字段的值是唯一的
AUTO_INCREMENT    标识该字段的值自动增长（整数类型，而且为主键）
DEFAULT    为该字段设置默认值

UNSIGNED 无符号
ZEROFILL 使用0填充
```

说明：

```
1. 是否允许为空，默认NULL，可设置NOT NULL，字段不允许为空，必须赋值
2. 字段是否有默认值，缺省的默认值是NULL，如果插入记录时不给字段赋值，此字段使用默认值
sex enum('male','female') not null default 'male'
age int unsigned NOT NULL default 20 必须为正值（无符号） 不允许为空 默认是20
3. 是否是key
主键 primary key
外键 foreign key
索引 (index,unique...)
```

## 二、not null与default

是否可空，null表示空，非字符串\
not null - 不可空\
null - 可空

默认值，创建列时可以指定默认值，当插入数据时如果未主动设置，则自动添加默认值\
create table tb1(\
nid int not null defalut 2,\
num int not null\
)

```
==================not null====================
mysql> create table t1(id int); #id字段默认可以插入空
mysql> desc t1;
+-------+---------+------+-----+---------+-------+
| Field | Type    | Null | Key | Default | Extra |
+-------+---------+------+-----+---------+-------+
| id    | int(11) | YES  |     | NULL    |       |
+-------+---------+------+-----+---------+-------+
mysql> insert into t1 values(); #可以插入空


mysql> create table t2(id int not null); #设置字段id不为空
mysql> desc t2;
+-------+---------+------+-----+---------+-------+
| Field | Type    | Null | Key | Default | Extra |
+-------+---------+------+-----+---------+-------+
| id    | int(11) | NO   |     | NULL    |       |
+-------+---------+------+-----+---------+-------+
mysql> insert into t2 values(); #不能插入空
ERROR 1364 (HY000): Field 'id' doesn't have a default value



==================default====================
#设置id字段有默认值后，则无论id字段是null还是not null，都可以插入空，插入空默认填入default指定的默认值
mysql> create table t3(id int default 1);
mysql> alter table t3 modify id int not null default 1;



==================综合练习====================
mysql> create table student(
    -> name varchar(20) not null,
    -> age int(3) unsigned not null default 18,
    -> sex enum('male','female') default 'male',
    -> hobby set('play','study','read','music') default 'play,music'
    -> );
mysql> desc student;
+-------+------------------------------------+------+-----+------------+-------+
| Field | Type                               | Null | Key | Default    | Extra |
+-------+------------------------------------+------+-----+------------+-------+
| name  | varchar(20)                        | NO   |     | NULL       |       |
| age   | int(3) unsigned                    | NO   |     | 18         |       |
| sex   | enum('male','female')              | YES  |     | male       |       |
| hobby | set('play','study','read','music') | YES  |     | play,music |       |
+-------+------------------------------------+------+-----+------------+-------+
mysql> insert into student(name) values('egon');
mysql> select * from student;
+------+-----+------+------------+
| name | age | sex  | hobby      |
+------+-----+------+------------+
| egon |  18 | male | play,music |
+------+-----+------+------------+

验证
```

## 三、 unique

```
============设置唯一约束 UNIQUE===============
方法一：
create table department1(
id int,
name varchar(20) unique,
comment varchar(100)
);


方法二：
create table department2(
id int,
name varchar(20),
comment varchar(100),
constraint uk_name unique(name)
);


mysql> insert into department1 values(1,'IT','技术');
Query OK, 1 row affected (0.00 sec)
mysql> insert into department1 values(1,'IT','技术');
ERROR 1062 (23000): Duplicate entry 'IT' for key 'name'
```

```
mysql> create table t1(id int not null unique);
Query OK, 0 rows affected (0.02 sec)

mysql> desc t1;
+-------+---------+------+-----+---------+-------+
| Field | Type    | Null | Key | Default | Extra |
+-------+---------+------+-----+---------+-------+
| id    | int(11) | NO   | PRI | NULL    |       |
+-------+---------+------+-----+---------+-------+
row in set (0.00 sec)

not null+unique的化学反应
```

```
create table service(
id int primary key auto_increment,
name varchar(20),
host varchar(15) not null,
port int not null,
unique(host,port) #联合唯一
);

mysql> insert into service values
    -> (1,'nginx','192.168.0.10',80),
    -> (2,'haproxy','192.168.0.20',80),
    -> (3,'mysql','192.168.0.30',3306)
    -> ;
Query OK, 3 rows affected (0.01 sec)
Records: 3  Duplicates: 0  Warnings: 0

mysql> insert into service(name,host,port) values('nginx','192.168.0.10',80);
ERROR 1062 (23000): Duplicate entry '192.168.0.10-80' for key 'host'

联合唯一
```

## 四、 primary key

primary key字段的值不为空且唯一

一个表中可以：

单列做主键\
多列做主键（复合主键）

但一个表内只能有一个主键primary key

```
============单列做主键===============
#方法一：not null+unique
create table department1(
id int not null unique, #主键
name varchar(20) not null unique,
comment varchar(100)
);

mysql> desc department1;
+---------+--------------+------+-----+---------+-------+
| Field   | Type         | Null | Key | Default | Extra |
+---------+--------------+------+-----+---------+-------+
| id      | int(11)      | NO   | PRI | NULL    |       |
| name    | varchar(20)  | NO   | UNI | NULL    |       |
| comment | varchar(100) | YES  |     | NULL    |       |
+---------+--------------+------+-----+---------+-------+
rows in set (0.01 sec)

#方法二：在某一个字段后用primary key
create table department2(
id int primary key, #主键
name varchar(20),
comment varchar(100)
);

mysql> desc department2;
+---------+--------------+------+-----+---------+-------+
| Field   | Type         | Null | Key | Default | Extra |
+---------+--------------+------+-----+---------+-------+
| id      | int(11)      | NO   | PRI | NULL    |       |
| name    | varchar(20)  | YES  |     | NULL    |       |
| comment | varchar(100) | YES  |     | NULL    |       |
+---------+--------------+------+-----+---------+-------+
rows in set (0.00 sec)

#方法三：在所有字段后单独定义primary key
create table department3(
id int,
name varchar(20),
comment varchar(100),
constraint pk_name primary key(id); #创建主键并为其命名pk_name

mysql> desc department3;
+---------+--------------+------+-----+---------+-------+
| Field   | Type         | Null | Key | Default | Extra |
+---------+--------------+------+-----+---------+-------+
| id      | int(11)      | NO   | PRI | NULL    |       |
| name    | varchar(20)  | YES  |     | NULL    |       |
| comment | varchar(100) | YES  |     | NULL    |       |
+---------+--------------+------+-----+---------+-------+
rows in set (0.01 sec)

单列主键
```

```
==================多列做主键================
create table service(
ip varchar(15),
port char(5),
service_name varchar(10) not null,
primary key(ip,port)
);


mysql> desc service;
+--------------+-------------+------+-----+---------+-------+
| Field        | Type        | Null | Key | Default | Extra |
+--------------+-------------+------+-----+---------+-------+
| ip           | varchar(15) | NO   | PRI | NULL    |       |
| port         | char(5)     | NO   | PRI | NULL    |       |
| service_name | varchar(10) | NO   |     | NULL    |       |
+--------------+-------------+------+-----+---------+-------+
rows in set (0.00 sec)

mysql> insert into service values
    -> ('172.16.45.10','3306','mysqld'),
    -> ('172.16.45.11','3306','mariadb')
    -> ;
Query OK, 2 rows affected (0.00 sec)
Records: 2  Duplicates: 0  Warnings: 0

mysql> insert into service values ('172.16.45.10','3306','nginx');
ERROR 1062 (23000): Duplicate entry '172.16.45.10-3306' for key 'PRIMARY'

多列主键
```

## 五、 auto\_increment

约束字段为自动增长，被约束的字段必须同时被key约束

```
#不指定id，则自动增长
create table student(
id int primary key auto_increment,
name varchar(20),
sex enum('male','female') default 'male'
);

mysql> desc student;
+-------+-----------------------+------+-----+---------+----------------+
| Field | Type                  | Null | Key | Default | Extra          |
+-------+-----------------------+------+-----+---------+----------------+
| id    | int(11)               | NO   | PRI | NULL    | auto_increment |
| name  | varchar(20)           | YES  |     | NULL    |                |
| sex   | enum('male','female') | YES  |     | male    |                |
+-------+-----------------------+------+-----+---------+----------------+
mysql> insert into student(name) values
    -> ('egon'),
    -> ('alex')
    -> ;

mysql> select * from student;
+----+------+------+
| id | name | sex  |
+----+------+------+
|  1 | egon | male |
|  2 | alex | male |
+----+------+------+


#也可以指定id
mysql> insert into student values(4,'asb','female');
Query OK, 1 row affected (0.00 sec)

mysql> insert into student values(7,'wsb','female');
Query OK, 1 row affected (0.00 sec)

mysql> select * from student;
+----+------+--------+
| id | name | sex    |
+----+------+--------+
|  1 | egon | male   |
|  2 | alex | male   |
|  4 | asb  | female |
|  7 | wsb  | female |
+----+------+--------+


#对于自增的字段，在用delete删除后，再插入值，该字段仍按照删除前的位置继续增长
mysql> delete from student;
Query OK, 4 rows affected (0.00 sec)

mysql> select * from student;
Empty set (0.00 sec)

mysql> insert into student(name) values('ysb');
mysql> select * from student;
+----+------+------+
| id | name | sex  |
+----+------+------+
|  8 | ysb  | male |
+----+------+------+

#应该用truncate清空表，比起delete一条一条地删除记录，truncate是直接清空表，在删除大表时用它
mysql> truncate student;
Query OK, 0 rows affected (0.01 sec)

mysql> insert into student(name) values('egon');
Query OK, 1 row affected (0.01 sec)

mysql> select * from student;
+----+------+------+
| id | name | sex  |
+----+------+------+
|  1 | egon | male |
+----+------+------+
row in set (0.00 sec)
```

```
#在创建完表后，修改自增字段的起始值
mysql> create table student(
    -> id int primary key auto_increment,
    -> name varchar(20),
    -> sex enum('male','female') default 'male'
    -> );

mysql> alter table student auto_increment=3;

mysql> show create table student;
.......
ENGINE=InnoDB AUTO_INCREMENT=3 DEFAULT CHARSET=utf8

mysql> insert into student(name) values('egon');
Query OK, 1 row affected (0.01 sec)

mysql> select * from student;
+----+------+------+
| id | name | sex  |
+----+------+------+
|  3 | egon | male |
+----+------+------+
row in set (0.00 sec)

mysql> show create table student;
.......
ENGINE=InnoDB AUTO_INCREMENT=4 DEFAULT CHARSET=utf8


#也可以创建表时指定auto_increment的初始值，注意初始值的设置为表选项，应该放到括号外
create table student(
id int primary key auto_increment,
name varchar(20),
sex enum('male','female') default 'male'
)auto_increment=3;




#设置步长
sqlserver：自增步长
    基于表级别
    create table t1（
        id int。。。
    ）engine=innodb,auto_increment=2 步长=2 default charset=utf8

mysql自增的步长：
    show session variables like 'auto_inc%';

    #基于会话级别
    set session auth_increment_increment=2 #修改会话级别的步长

    #基于全局级别的
    set global auth_increment_increment=2 #修改全局级别的步长（所有会话都生效）


#！！！注意了注意了注意了！！！
If the value of auto_increment_offset is greater than that of auto_increment_increment, the value of auto_increment_offset is ignored. 
翻译：如果auto_increment_offset的值大于auto_increment_increment的值，则auto_increment_offset的值会被忽略 
比如：设置auto_increment_offset=3，auto_increment_increment=2




mysql> set global auto_increment_increment=5;
Query OK, 0 rows affected (0.00 sec)

mysql> set global auto_increment_offset=3;
Query OK, 0 rows affected (0.00 sec)

mysql> show variables like 'auto_incre%'; #需要退出重新登录
+--------------------------+-------+
| Variable_name            | Value |
+--------------------------+-------+
| auto_increment_increment | 1     |
| auto_increment_offset    | 1     |
+--------------------------+-------+



create table student(
id int primary key auto_increment,
name varchar(20),
sex enum('male','female') default 'male'
);

mysql> insert into student(name) values('egon1'),('egon2'),('egon3');
mysql> select * from student;
+----+-------+------+
| id | name  | sex  |
+----+-------+------+
|  3 | egon1 | male |
|  8 | egon2 | male |
| 13 | egon3 | male |
+----+-------+------+

步长increment与起始偏移量offset:auto_increment_increment,auto_increment_offset
```

auto\_increment时增加新内容

清空表：

delete from t1; #如果有自增id，新增的数据，仍然是以删除前的最后一样作为起始。

truncate table t1;数据量大，删除速度比上一条快，且直接从零开始，

## 六、 foreign key

**一 快速理解foreign key**

员工信息表有三个字段：工号 姓名 部门

公司有3个部门，但是有1个亿的员工，那意味着部门这个字段需要重复存储，部门名字越长，越浪费

解决方法：

我们完全可以定义一个部门表

然后让员工信息表关联该表，如何关联，即foreign key

```
#表类型必须是innodb存储引擎，且被关联的字段，即references指定的另外一个表的字段，必须保证唯一
create table department(
id int primary key,
name varchar(20) not null
)engine=innodb;

#dpt_id外键，关联父表（department主键id），同步更新，同步删除
create table employee(
id int primary key,
name varchar(20) not null,
dpt_id int,
constraint fk_name foreign key(dpt_id)
references department(id)
on delete cascade
on update cascade 
)engine=innodb;


#先往父表department中插入记录
insert into department values
(1,'欧德博爱技术有限事业部'),
(2,'艾利克斯人力资源部'),
(3,'销售部');


#再往子表employee中插入记录
insert into employee values
(1,'egon',1),
(2,'alex1',2),
(3,'alex2',2),
(4,'alex3',2),
(5,'李坦克',3),
(6,'刘飞机',3),
(7,'张火箭',3),
(8,'林子弹',3),
(9,'加特林',3)
;


#删父表department，子表employee中对应的记录跟着删
mysql> delete from department where id=3;
mysql> select * from employee;
+----+-------+--------+
| id | name  | dpt_id |
+----+-------+--------+
|  1 | egon  |      1 |
|  2 | alex1 |      2 |
|  3 | alex2 |      2 |
|  4 | alex3 |      2 |
+----+-------+--------+


#更新父表department，子表employee中对应的记录跟着改
mysql> update department set id=22222 where id=2;
mysql> select * from employee;
+----+-------+--------+
| id | name  | dpt_id |
+----+-------+--------+
|  1 | egon  |      1 |
|  3 | alex2 |  22222 |
|  4 | alex3 |  22222 |
|  5 | alex1 |  22222 |
+----+-------+--------+

 示范
```

**二 如何找出两张表之间的关系**&#x20;

```
分析步骤：
#1、先站在左表的角度去找
是否左表的多条记录可以对应右表的一条记录，如果是，则证明左表的一个字段foreign key 右表一个字段（通常是id）

#2、再站在右表的角度去找
是否右表的多条记录可以对应左表的一条记录，如果是，则证明右表的一个字段foreign key 左表一个字段（通常是id）

#3、总结：
#多对一：
如果只有步骤1成立，则是左表多对一右表
如果只有步骤2成立，则是右表多对一左表

#多对多
如果步骤1和2同时成立，则证明这两张表时一个双向的多对一，即多对多,需要定义一个这两张表的关系表来专门存放二者的关系

#一对一:
如果1和2都不成立，而是左表的一条记录唯一对应右表的一条记录，反之亦然。这种情况很简单，就是在左表foreign key右表的基础上，将左表的外键字段设置成unique即可
```

**三 建立表之间的关系**

```
#一对多或称为多对一
三张表：出版社，作者信息，书

一对多（或多对一）：一个出版社可以出版多本书

关联方式：foreign key
```

```
=====================多对一=====================
create table press(
id int primary key auto_increment,
name varchar(20)
);

create table book(
id int primary key auto_increment,
name varchar(20),
press_id int not null,
foreign key(press_id) references press(id)
on delete cascade
on update cascade
);


insert into press(name) values
('北京工业地雷出版社'),
('人民音乐不好听出版社'),
('知识产权没有用出版社')
;

insert into book(name,press_id) values
('九阳神功',1),
('九阴真经',2),
('九阴白骨爪',2),
('独孤九剑',3),
('降龙十巴掌',2),
('葵花宝典',3)
;
```

```
一夫多妻制

#妻子表的丈夫id外键到丈夫表的id
```

```
#多对多
三张表：出版社，作者信息，书

多对多：一个作者可以写多本书，一本书也可以有多个作者，双向的一对多，即多对多
　　
关联方式：foreign key+一张新的表
```

```
=====================多对多=====================
create table author(
id int primary key auto_increment,
name varchar(20)
);


#这张表就存放作者表与书表的关系，即查询二者的关系查这表就可以了
create table author2book(
id int not null unique auto_increment,
author_id int not null,
book_id int not null,
constraint fk_author foreign key(author_id) references author(id)
on delete cascade
on update cascade,
constraint fk_book foreign key(book_id) references book(id)
on delete cascade
on update cascade,
primary key(author_id,book_id)
);


#插入四个作者，id依次排开
insert into author(name) values('egon'),('alex'),('yuanhao'),('wpq');

#每个作者与自己的代表作如下
egon: 
九阳神功
九阴真经
九阴白骨爪
独孤九剑
降龙十巴掌
葵花宝典
alex: 
九阳神功
葵花宝典
yuanhao:
独孤九剑
降龙十巴掌
葵花宝典
wpq:
九阳神功


insert into author2book(author_id,book_id) values
(1,1),
(1,2),
(1,3),
(1,4),
(1,5),
(1,6),
(2,1),
(2,6),
(3,4),
(3,5),
(3,6),
(4,1)
;
```

```
单张表：用户表+相亲关系表，相当于：用户表+相亲关系表+用户表
多张表：用户表+用户与主机关系表+主机表

中间那一张存放关系的表，对外关联的字段可以联合唯一
```

```
#一对一
两张表：学生表和客户表

一对一：一个学生是一个客户，一个客户有可能变成一个学校，即一对一的关系

关联方式：foreign key+unique
```

```
#一定是student来foreign key表customer，这样就保证了：
#1 学生一定是一个客户，
#2 客户不一定是学生，但有可能成为一个学生


create table customer(
id int primary key auto_increment,
name varchar(20) not null,
qq varchar(10) not null,
phone char(16) not null
);


create table student(
id int primary key auto_increment,
class_name varchar(20) not null,
customer_id int unique, #该字段一定要是唯一的
foreign key(customer_id) references customer(id) #外键的字段一定要保证unique
on delete cascade
on update cascade
);


#增加客户
insert into customer(name,qq,phone) values
('李飞机','31811231',13811341220),
('王大炮','123123123',15213146809),
('守榴弹','283818181',1867141331),
('吴坦克','283818181',1851143312),
('赢火箭','888818181',1861243314),
('战地雷','112312312',18811431230)
;


#增加学生
insert into student(class_name,customer_id) values
('脱产3班',3),
('周末19期',4),
('周末19期',5)
;
```

```
例一：一个用户只有一个博客

    用户表：
    id  name
   egon
   alex
   wupeiqi


    博客表   
           fk+unique
    id url name_id
 xxxx   1
 yyyy   3
 zzz    2



例二：一个管理员唯一对应一个用户
    用户表：
    id user  password
 egon    xxxx
 alex    yyyy

    管理员表：
       fk+unique
    id user_id password
  1      xxxxx
  2      yyyyy

其他例子
```

## 七、 作业

练习：账号信息表，用户组，主机表，主机组

```
#用户表
create table user(
id int not null unique auto_increment,
username varchar(20) not null,
password varchar(50) not null,
primary key(username,password)
);

insert into user(username,password) values
('root','123'),
('egon','456'),
('alex','alex3714')
;


#用户组表
create table usergroup(
id int primary key auto_increment,
groupname varchar(20) not null unique
);

insert into usergroup(groupname) values
('IT'),
('Sale'),
('Finance'),
('boss')
;


#主机表
create table host(
id int primary key auto_increment,
ip char(15) not null unique default '127.0.0.1'
);

insert into host(ip) values
('172.16.45.2'),
('172.16.31.10'),
('172.16.45.3'),
('172.16.31.11'),
('172.10.45.3'),
('172.10.45.4'),
('172.10.45.5'),
('192.168.1.20'),
('192.168.1.21'),
('192.168.1.22'),
('192.168.2.23'),
('192.168.2.223'),
('192.168.2.24'),
('192.168.3.22'),
('192.168.3.23'),
('192.168.3.24')
;


#业务线表
create table business(
id int primary key auto_increment,
business varchar(20) not null unique
);
insert into business(business) values
('轻松贷'),
('随便花'),
('大富翁'),
('穷一生')
;


#建关系：user与usergroup

create table user2usergroup(
id int not null unique auto_increment,
user_id int not null,
group_id int not null,
primary key(user_id,group_id),
foreign key(user_id) references user(id),
foreign key(group_id) references usergroup(id)
);

insert into user2usergroup(user_id,group_id) values
(1,1),
(1,2),
(1,3),
(1,4),
(2,3),
(2,4),
(3,4)
;



#建关系：host与business

create table host2business(
id int not null unique auto_increment,
host_id int not null,
business_id int not null,
primary key(host_id,business_id),
foreign key(host_id) references host(id),
foreign key(business_id) references business(id)
);

insert into host2business(host_id,business_id) values
(1,1),
(1,2),
(1,3),
(2,2),
(2,3),
(3,4)
;

#建关系：user与host

create table user2host(
id int not null unique auto_increment,
user_id int not null,
host_id int not null,
primary key(user_id,host_id),
foreign key(user_id) references user(id),
foreign key(host_id) references host(id)
);

insert into user2host(user_id,host_id) values
(1,1),
(1,2),
(1,3),
(1,4),
(1,5),
(1,6),
(1,7),
(1,8),
(1,9),
(1,10),
(1,11),
(1,12),
(1,13),
(1,14),
(1,15),
(1,16),
(2,2),
(2,3),
(2,4),
(2,5),
(3,10),
(3,11),
(3,12)
;
```

作业：

![](https://3085229280-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LhJBJh-S7axNx1yCDIO%2F-LhJBKh2SxrBiQBzufa3%2F-LhJBtV16YEdMM_rL8XX%2F8-3-4%E4%BD%9C%E4%B8%9A.png?generation=1560485820743179\&alt=media)
